Bench Top Small Lab Drying Oven Electric Chemistry Hot Air
Hot air circulating oven for heating the pharmaceutical, chemical,
food, agricultural products, aquatic
products, light industry materials, curing, drying dehydration.
Such as raw materials, medicine water,
extracts, powders, granules, dehydrated vegetables.
|Temperature Range||RT20℃～300 ℃ (different temperature range per customer requirements
Forced air circulation
|Temp range||+60℃ ～ +180℃|
|Temp uniformity||±10.0℃ (With load 35KW)|
|Heating up time||From +60 up to +180℃ 60min no load|
1. Load fever 35KW, load the hair must be controlled by the
machine. The machine provide control
2. Signal control of the customer's load when the machine stops
running, the temperature too high or the machine fails must be cut
off the load heating
W 1750 × H 1850 × D 2500 mm
Approx W 2250 × H 2150 × D 3050 mm (External size does not include
the machine motor,
exhaust fan and other protruding parts)
Silicone, double wing door W(850+850)xH 1850mm
Inner material:SUS304# stainless steel ；Exterior size:cooling baked
|Insulation material||Glass wool|
High quality nickel-chromium alloy wire electric heaters,
ST-570 South Korea imported thermostat ST-570
*high precision(0.1%), high performance
*Support multiple input (T / C, RTD, DCV)
*Can finish multiple output and simultaneous output (Max 4 points)
*Simple parameter operation , available text settings
*Supports suppressing system Overshoot function
*Alarm output 1 point
Auxiliary output status operation screen displayed
*Each zone input adjustment function (Max 4 Zone)
To achieve control heating and cooling function
*PID automatic adjustment function (AT Gain)
*Supports multiple communication protocols (Modbus, etc.)
*To achieve high quality, high reliability (CE, CUL, ISO, etc.)*
|Temperature body||K thermoelectric|
Ventilator 1 type, displacement of 130 ~ 250m3 / h (from the
exhaust fan to the duct
outside the laboratory to be handled by the customer)
Over-temperature protection, motor overload protection, buzzer,
fault indicator, no fuse switch.
Digital working timer 1type, the timer starts when the temperature
reaches the set value, , 0 ~ 9999 hours
Controller ；‚Over-temperature protection；ƒwork timer； ④ emergency
stop switch; ⑤
power switch;⑥ timer switch; ⑦ fault lights.
These series of constant temperature and humidity test chamber are
applied to industrial product reliability test. It has features of
high precise temperature and humidity and wide control range. Meet
GB5220.127.116.11.6-95 standard requirements of environmental testing
equipment and test methods for the basic parameters of electric and
electronic products under the condition of humidity, low
temperature, high temperature, and constant heat.
The product can meet the following standards:
● GB-2423.2-89(IEC68-2-2)Test B:High Temperature Test
● GJB360.8-87(MIL-STD.202F) High Temperature Life Test
● GJBl50.3(MIL-STD-810D)High temperature test
1.Outside stainless steel, fine powder coating treatment; Inner SUS#304 stainless
2.High quality paint drying oven use new high temperature resistant
long shaft motor.
3 Turbine fan.
4.Silicone forced tight.
5.Over temperature protection, super load automatic power system.
6.Circulation system: air force level cycle.
8.The thermostat: PID microcomputer control, automatic constant
temperature, temperature quickly compensation function.
9.Timer: temperature to time, when the power failure alarm
10.According to customer demand matching glass window can be
customized according to customer specifications specified.